Prime MX 3030 Interior Topcoat - Clear

Clear water-based top coat for all interior furniture and panel doors
General Information
Prime MX 3030 is a non-yellowing top-coat water-based clear varnish with high surface resistance developed for all interior wood panels, furniture, MDF, and panel doors.
General Features
  • High resilience
  • Non yellowing
  • Hard and elastic
  • Environmentally friendly
  • Ready to use
Where to Use
  • Interior wooden furniture
  • Panel doors
Packaging
  • MX 3030 2,5 L. (2,575 Kg)
  • MX 3030 15 L. (15,45 Kg)
  • MX 4060 2,5 L. (2,95 Kg)
  • MX 4060 15 L. (17,7 Kg)
Color Chart

Clear

Warning:

The above colors are applied on pine and are intended to approximate the final color. The color obtained will vary according to the wood's type, texture, and absorbency. To see the final color, it is recommended to apply the coating on the wood to be actually used.

Surface Preparation
    • New wood surfaces:
      • Remove any dirt, oil and wood dust from the surface.
      • Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust.
  • Coated Wood Surfaces:
    • Do not apply the product directly on pre-coated surfaces.
    • Remove the old paint/varnish from the surface completely with a sandpaper.
    • Remove the remaining dust with a damp cloth.
Application
  • The product is ready to use and does not require thinning. If needed, may be diluted up to 5% with drinking water.
  • Stir the product thoroughly before use and check its homogeneity. Repeat this process during the application.
  • Apply the product in 2 or 3 coats by spray gun (2,5-3 mm nozzle, min. 3 atm pressure) and wait 1,5-2 hours and perform a slight sanding with sandpaper #180/220 between coats.
  • If a smooth surface is desired sand the surface thoroughly with 180-400 no. Sandpaper by waiting 24 hours before applying the final coat.
  • Wait 24 hours for complete dry.
Maintenance
  • Do not apply the product directly on pre-coated surfaces.
  • Clean the wood surface completely from dirt and oil and perform a slight sanding.
  • Thoroughly clean the generated dust.
  • Repeat same process as described in “Application” with 1 or 2 coats depending on weathering.
  • Inspect annually and maintain as required.
Information

The performance of the varnish increases with regular maintenance. Check your wood every year to maintain ideal protection and maintain as required.

General Instructions

For product application, health and safety information, read the product's Technical Data Sheet and Safety Data Sheet (SDS) from the documents section.

TOP