Description

Description

General Information

Top coat silk-matt white paint for interior/exterior wood, metal, and mineral

General Features:

  • High hiding power
  • Non-yellowing
  • Resistant to UV and exterior weather conditions
  • Water-repellent
  • Ready to use

Where to Use

  • Wooden surfaces except floors
  • Panel doors
  • Metals
  • Panel doors

Packaging Dimensions

  • 2,5 L.
  • 15 L. (Produced on an order basis)
Surface Preparation

New Wood Surfaces: 

– Remove any dirt, oil, and wood dust from the surface. 

– Sand the surface with sandpaper #80/120. Thoroughly clean the generated dust. 

- Apply Hemel Acrylic Filling Paste wherever necessary to achieve a smooth surface.

New Metal Surfaces 

– It is not suitable for direct use on rusty metal surfaces. 

- Clean the surface of all dirt, oil, and dust. Wiping the surface with cellulosethinner before application is recommended.

New Mineral Surfaces 

- Do not apply the product on pre-coated surfaces. 

- Apply Hemel Acrylic Filling Paste wherever necessary to achieve a smooth surface.

Old Coated Surfaces 

Do not apply the product directly to painted/varnished surfaces. 

Remove the old paint/varnish from the surface completely with a sandpaper.

Application: 

The product is ready to use and does not require thinning.

Stir the product thoroughly before use and check its homogeneity. Repeat this process during theapplication.

Apply the product in 2 coats by brush, roller, or spray gun (2,5-3 mm nozzle, min. 3 atm pressure)

Wait 1,5-2 hours and lightly sand with sandpaper #180/220 between coats.

Wait 12 hours for complete drying.

General Instruction:

- FOR EXTERIOR AND INTERIOR USE.

- NOT SUITABLE FOR FLOORINGS.

- Keep product closed when not in use.

- The general application temperature of the product is between 15oC to 25oC at a relative humidity range of 40-65%.

- The moisture content of the wood to be painted should be below 20% for exterior applications and below 12% for interior applications.

- The product should be protected from freezing and stored at temperatures between 5°C to 35°C.

Painting tools should be cleaned with soap and plenty of warm water after application. 


  • To avoid brush strokes, make small areas of application and finish the application in the edging of wood. In addition, always brush in the direction of a non-stained area and then return to the stained surface by taking the excess stain.
  • Apply in the direction of wood grains to obtain a homogeneous appearance.
  • Always start painting at the top of the wood.
  • To prevent the glass, hinge, lock, door handle, and other accessories from painting, cover them with masking tape before starting the application.
  • For good protection, make sure the entire surface of the wood is well stained. Do not forget to apply head parts to the upper and lower edges of the doors and under the window sills.
  • Make sure that the edge corners of the wood you are applying will be chamfered (rounded) and no sharp corners. You cannot provide adequate protection to these sharp corners as you cannot apply enough of the product for film-forming

The performance of the varnish increases with regular maintenance. To ensure optimal protection, check your exterior wood every two years and maintain it if necessary.

The colors shown in the color field are applied on pine and care has been taken to ensure that they are close to reality. The color and shine you will achieve will vary depending on the properties, texture and absorbency of the wood. Additionally, how thick and how many layers of paint is applied will also affect the result. In order to see the real color, it is recommended to try it on the wood to be used.

Additional information

Additional information

Colour

Honey, Burma, Pine, Hazelnut, Walnut, Natural, Teak, White, Transparent, Semi Transparent

Packaging

2,5 L., 15 L.